Where will I receive support after the conclusion of the campaign?
Full support will be available at the following link and also via email at [email protected]
Last updated: February 03, 2020 02:57
What devices can be connected to Woojer Edge?
Woojer Edge series products can be connected to any standard audio source via a 3.5mm cable, USB-C connection, or via a Bluetooth connection. The Vest Edge™ works in stereo mode, dividing the transducers into two groups - 3 left & 3 right. (See main differences between the Vest and the Strap below)
Last updated: February 03, 2020 02:57
Do I need to install a driver or a software?
No! Just plug & play.
Last updated: February 03, 2020 02:58
Does it work with mobile phone?
Absolutely! Both products connect to any standard audio source. To connect to game consoles, you can use either the console’s controller output jack or a TV audio output jack. For wireless connection, you’ll need an external Bluetooth transmitter.
Last updated: February 03, 2020 02:58
Does it work with a PC?
Yes. You’ll just need to connect it through a 3.5mm audio / USB jack, or through a Bluetooth connection. No driver is required, no setup is needed.
Last updated: February 03, 2020 02:59
Will it work with VR devices?
Yes. Both products can be easily connected to VR devices, whether it’s a stationary or a room-scale VR. In certain VR headsets (e.g.: Oculus Quest), you’ll have to connect external headphones instead of the HMD built-in speakers/headphones. Some setups require applying audio-mirroring on your PC.
Last updated: February 03, 2020 02:59
How are these products for music and music production?
Woojer gives physical sensation to any content you hear. It provides music producers with an extraordinary tool for precise music production.
Last updated: February 03, 2020 03:00
What are the main differences between Vest Edge™ and Strap Edge™?
Strap Edge™ has one OSCI™ TRX52 transducer, Vest Edge™ has six. Vest gives you a stereo haptic experience, since its transducers are divided to two groups – left and right. In the Strap Edge™ the transducer can be positioned on your spine, on your sternum, or on your waist. The Vest’s transducers’ positions are: two on the sides, two on the back, two on the front. Strap Edge™ has one Lithium-ion 3350mAh, 4.2V battery. The Vest Edge™ has 4 X Lithium-ion battery pack (3350mAh, 14.5V).
Last updated: February 03, 2020 03:00
How long does the battery last?
Up to 8 hours playtime, depending on usage and volume/sensation level
Last updated: February 03, 2020 03:01
How long does it take to fully charge the Strap/Vest?
Approximately 3 hours.
Last updated: February 03, 2020 03:01
How many sensory points does the Vest Edge™ have?
Vest Edge™ has six sensory points (OSCI™ TRX52 transducers).
Last updated: February 03, 2020 03:02
Will it work with my wireless headphones?
For mobile, when using Bluetooth headphones - it’s possible as long as your device supports dual Bluetooth connection (e.g.: Samsung Galaxy S9). Otherwise, you’ll need an external dual Bluetooth transmitter which should be purchased separately. For PC, when using Bluetooth headphones or other RF headphones - you’ll need to configure your operating system to output to both the headphones and the Woojer. You might be needing an external dual Bluetooth transmitter. For game consoles with Bluetooth headphones or other RF headphones - depends on your specific setup, you might need to use a dual Bluetooth transmitter, or use your TV sound output jack.
Last updated: February 03, 2020 03:02
Will there be a difference between the Indiegogo and Consumer versions?
No.
Last updated: February 03, 2020 03:03
Is there any latency?
Woojer Edge products are equipped with Qualcomm™ CSR APTX low-latency Bluetooth 5.0 chip. This chip is especially designed to provide high-quality, low-latency sound stream. However, to get the best results, your audio source must support APTX low-latency as well. Of course, other Bluetooth audio protocols and former Bluetooth versions (A2DP / Bluetooth 4.2) are supported as well.
Last updated: February 03, 2020 03:03
Is it safe?
Both products are designed to meet all relevant UL (60065), CE (60065) and FCC regulations. The EMF Magnetic Field is ~5% of the ICNIRP safety guidelines. For more information, read here - http://www.icnirp.org/cms/upload/publications/ICNIRPemfgdl.pdf
Last updated: February 03, 2020 03:04
Can I use Woojer products if I have a pacemaker?
No, in the same manner that pacemakers must not have any magnets in their vicinity. (Woojer products contain permanent magnets)
Last updated: February 03, 2020 03:04
What is the frequency response?
The frequency response is1-200Hz
Last updated: February 03, 2020 03:04
Does it make noise?
No. It is silent to the outside – so you can play your favorite game for hours on end, at any sensation level you want and still never disturb anyone.
Last updated: February 03, 2020 03:05
Can I watch movies on TV with Woojer?
Of course. You can connect your Vest Edge™ or Strap Edge™ to your TV or mobile to enjoy an immersive sensory experience. For TV, use the 3.5mm output jack or a Bluetooth connection. Note that not all TV sets have these output types.
Last updated: February 03, 2020 03:05
Can Woojer products™ be washed?
No. They can be wiped down with a wet cloth.
Last updated: February 03, 2020 03:06
Are Woojer products water resistant?
No. Treat them similar to your cellphone or your game console.
Last updated: February 03, 2020 03:06
Can I use Woojer if I am hard of hearing?
Of course! And you’ll be truly amazed! Woojer’s tactile sensation is phenomenal for the hearing impaired and even for the deaf.
Last updated: February 03, 2020 03:07
Does it come with headphones?
No.
Last updated: February 03, 2020 03:07
What is the size of the Edge™ products and what are its dimensions?
Both Strap and Vest are designed to be “One size fits all”. The adjusting straps stretch up to 65 inches.
Last updated: February 03, 2020 03:08
How much does it weigh?
Vest Edge™ weights about 4lb 13oz (2kg). Strap Edge™ weights about 8.45oz (240g)
Last updated: February 03, 2020 03:08
Are the vibration level and the volume levels adjustable?
Yes, the vibration volume levels are independently controlled by the buttons on the front panel of the device.
Last updated: February 03, 2020 03:09
I use USB headphones. Can it work together with my headphones?
Yes. You’ll need to configure your operating system to output to both devices simultaneously. If your headphones have a separated base station, and it contains an additional 3.5mm output – you can use this one for your Woojer.
Last updated: February 03, 2020 03:09
Which countries do you ship to?
We are presently shipping worldwide.
Last updated: February 03, 2020 03:10
What is included in the shipping costs?
Shipping cost includes courier costs. for US and EU shipments it includes also international customs and VAT.
Last updated: February 03, 2020 03:13
What is BackerKit?
BackerKit is a service that crowdfunded project creators use to keep track of hundreds to tens of thousands of backers—from shipping details, pledge levels, preferences and quantities, whether they have paid or had their card declined, special notes, and everything in between!
The BackerKit software and support team is independent from the campaign’s project team—BackerKit does not handle the actual reward shipping. For more information about the preparation or delivery status of your rewards, please check the project's updates page.
How does BackerKit work?
After the campaign ends, the project creator will send you an email with a unique link to your survey. You can check out a walkthrough of the process here.
I never received my invitation. How do I complete the survey?
The most common reasons for not receiving a survey email is that you may be checking an email inbox different from the email address you used to sign up with Kickstarter, Indiegogo or Tilt Pro account, or it may be caught in your spam filter.
Confirm that the email address you are searching matches the email address tied to your Kickstarter, Indiegogo, or Tilt Pro account. If that doesn’t work, then try checking your spam, junk or promotions folders. You can also search for "backerkit” in your inbox.
To resend the survey to yourself, visit the project page and input the email address associated with your Kickstarter, Indiegogo or Tilt Pro account.
How do I update my shipping address?
BackerKit allows you to update your shipping address until the shipping addresses are locked by the project creator. To update your address, go back to your BackerKit survey by inputting your email here.
When will my order be shipped, charged or locked?
That is handled directly by the project creator. BackerKit functions independently of the project itself, so we do not have control of their physical shipping timeline. If you want to check on the project’s status, we recommend reading over the project's updates page.
I completed the survey, but haven't received my rewards yet. When will they arrive?
As BackerKit does not actually handle any rewards or shipping, the best way to stay updated on the shipping timeline would be to check out the project's updates page.